MHE TRAINING

A counterbalance B2 training course is a comprehensive course that teaches participants how to safely and efficiently operate a counterbalance forklift with a lifting capacity of over 10,000kg.

The course is typically delivered over 1-3 days, depending on the participants’ prior experience. During the course, participants will learn about the different types of counterbalance forklifts and their components as well as how to conduct a pre-use inspection, how to safely load and unload cargo and how to operate the forklift in a variety of environments.

At the end of the course, participants will be required to complete an assessment to demonstrate their understanding of the material and their ability to safely operate a counterbalance B2 forklift. Upon successful completion of the course, participants will receive a certificate of completion.

The course covers a wide range of topics, including:

• Introduction to counterbalance B2 training: This section covers the basics of counterbalance forklifts, including their different types and components, as well as the safety procedures that must be followed when operating them.
• Safety procedures: This section covers a wide range of safety topics, including pre-use inspections, operating procedures, and emergency procedures.
• Equipment overview: This section covers the different components of a counterbalance forklift and how they work together.
• Basic operation: This section covers the basic steps involved in operating a counterbalance forklift, such as starting and stopping the engine, moving the forklift, and lifting and lowering loads.
• Advanced techniques: This section covers more advanced techniques, such as operating the forklift in confined spaces and stacking and destacking loads.
• Troubleshooting: This section covers common problems that can occur when operating a counterbalance forklift and how to troubleshoot them.
• Assessment: This section covers the assessment that participants will complete at the end of the course to demonstrate their understanding of the material and their ability to safely operate a counterbalance B2 forklift.

A counterbalance B3 training course is a comprehensive training program that teaches students how to safely and efficiently operate counterbalance forklifts with a lifting capacity over 15,000kg.

Students will learn about the different types of counterbalance forklifts, their components, and how to safely operate them in a variety of environments. They will also learn about the importance of regular maintenance and how to identify and troubleshoot common problems.

The course typically lasts for 3-5 days and includes both classroom instruction and practical training. Upon successful completion of the course, students will receive a certificate of completion and be authorized to operate counterbalance B3 forklifts in the workplace.

The course covers a wide range of topics, including:

• Day 1: Introduction to counterbalance forklifts, safety procedures, and machine operation (including starting, stopping, moving, and steering the forklift, as well as operating the hydraulic controls)
• Day 2: Troubleshooting and maintenance, as well as practical training on a variety of forklift tasks, such as loading and unloading pallets, stacking and destacking, and driving on ramps
• Day 3: Written and practical assessments

This course is designed to provide participants with the skills and knowledge necessary to safely and efficiently operate a reach truck (D1/D2). Participants will learn about the different components of a reach truck, how to perform a pre-use inspection, and how to safely operate the truck in a variety of environments.

The course will cover the following topics:

• Introduction to reach trucks
• Reach truck safety
• Pre-use inspection
• Basic operation
• Loading and unloading pallets
• Stacking and destacking pallets
• Advanced operation
• Maintenance and troubleshooting

A P.P.T (powered pallet truck) A1 training course is a one-day course that will teach you how to safely and efficiently operate a pedestrian-operated powered pallet truck. The course will cover the following topics:

• Introduction to powered pallet trucks and their uses
• Safety regulations and procedures
• Pre-operation checks and maintenance
• Basic operating controls and maneuvers
• Load handling and stacking
• Troubleshooting and fault finding

You will also have the opportunity to practice operating a powered pallet truck in a safe and controlled environment.

The course is suitable for anyone who needs to operate a powered pallet truck in a workplace setting. It is particularly beneficial for new employees, as well as those who are transferring from a different type of forklift truck.

Upon successful completion of the course, you will receive a certificate of competence. This certificate will be valid for three years, after which time you will need to take a refresher course.

This course is designed to provide operators with the knowledge and skills to safely and efficiently operate a powered pallet truck stacker A5.

Course Outline

• Introduction
• What is a powered pallet truck stacker A5?
• Course objectives
• Health and safety considerations
• Machine familiarisation
• Parts and components
• Controls and operation
• Pre-operational checks
• Daily visual inspection
• Functional tests
• Load handling
• Safe loading and unloading procedures
• Center of gravity
• Load stability
• Stacking and de-stacking
• Safe stacking and de-stacking procedures
• Load capacity
• Mast stability
• Practical operation
• Supervised practice on a variety of tasks

A Low-Level Order Picker (LLOP) A2 training course is a comprehensive course that teaches operators how to safely and efficiently operate an LLOP truck. The course covers all aspects of LLOP operation, including:

• Machine inspection and maintenance
• Pre-use checks
• Safe operating procedures
• Load handling and stacking
• Emergency procedures

The course is delivered by experienced and qualified instructors, and includes a combination of theory and practical training. Participants will learn about the different components of an LLOP truck, how to operate the controls safely, and how to handle different types of loads. They will also be taught about the relevant health and safety legislation and regulations.

Upon successful completion of the course, participants will be awarded an RTITB-accredited LLOP A2 certificate. This certificate is recognized by employers throughout the UK, and allows operators to work with LLOP trucks in a variety of industries.

A V.N.A – H.L.OP (high level order picker) E1/E2 training course is a comprehensive training program that teaches participants how to safely and efficiently operate a high level order picker (HLOP). The course covers a wide range of topics, including:

• HLOP safety procedures
• HLOP operating controls
• HLOP maintenance and inspection
• HLOP loading and unloading techniques
• HLOP order picking techniques

The course is typically divided into two parts: E1 and E2. E1 covers the basics of HLOP operation, while E2 focuses on more advanced topics, such as order picking and loading and unloading.

Upon successful completion of the course, participants will be able to:

• Safely operate a HLOP
• Load and unload a HLOP efficiently
• Pick orders from a HLOP accurately and efficiently
• Identify and troubleshoot common HLOP problems

This course is ideal for anyone who needs to operate a HLOP, such as warehouse workers, forklift drivers, and order pickers. It is also a valuable training program for supervisors and managers who need to understand the safe and efficient operation of HLOPs.

A V.N.A – Man up (F1) training course is a forklift operator training course that focuses on the operation of Very Narrow Aisle (VNA) forklift trucks with a man-up platform. VNA forklift trucks are specially designed to operate in narrow aisles, and man-up platforms allow the operator to rise to the level of the load, making it easier to place and retrieve loads at high altitudes.

The V.N.A – Man up (F1) training course covers a wide range of topics, including:

• The safe operation of VNA forklift trucks
• Pre-operation inspections and maintenance
• Load handling techniques
• Operating in confined spaces
• Emergency procedures

The course typically lasts for 3-5 days and includes a combination of theoretical and practical training. Upon successful completion of the course, trainees will be awarded a certificate of competence, which is required by law to operate VNA forklift trucks in the workplace.

Here are some of the benefits of completing a V.N.A – Man up (F1) training course:

• Increased safety: VNA forklift trucks can be dangerous if not operated correctly. This training course will teach you how to operate a VNA forklift truck safely and efficiently.
• Improved productivity: VNA forklift trucks are designed to help you move goods more quickly and efficiently. This training course will teach you how to get the most out of your VNA forklift truck.
• Enhanced career prospects: Completing this training course will make you more marketable to potential employers. VNA forklift operators are in high demand, and employers are often willing to pay a premium for qualified operators.

A V.N.A – Man down (F2) training course is designed to teach operators how to safely and efficiently operate a narrow aisle forklift (VNA) with a man-down platform. The course covers a wide range of topics, including:

• VNA forklift safety and regulations
• VNA forklift controls and operation
• VNA forklift loading and unloading procedures
• VNA forklift maneuvering in narrow aisles
• VNA forklift maintenance and troubleshooting

The course typically includes a combination of classroom instruction and practical training on a VNA forklift. Upon successful completion of the course, operators will receive a certificate of completion and be qualified to operate a VNA forklift in a workplace setting.

Here are some of the benefits of taking a V.N.A – Man down (F2) training course:

• Improve your safety and operating skills
• Reduce the risk of accidents and injuries
• Increase your productivity and efficiency
• Enhance your job prospects
• Meet regulatory requirements

The M.E.W.P. (Mobile Elevating Work Platform) – Scissor Lift 3a training course is designed to provide operators with the knowledge and skills necessary to safely and efficiently operate scissor lifts. The course covers a wide range of topics, including:

• MEWPs and their applications
• Scissor lift components and operation
• Pre-use inspections and maintenance
• Safe work practices
• Emergency procedures

The course is typically delivered over one day and includes a combination of theory and practical training. The theory component covers topics such as the relevant legislation and regulations, the different types of scissor lifts, and the hazards associated with their operation. The practical component provides operators with the opportunity to practice operating a scissor lift in a safe and controlled environment.

Upon successful completion of the course, operators will receive an IPAF (International Powered Access Federation) PAL Card (Powered Access License), which is valid for five years. This card demonstrates that the operator has been trained and assessed on the safe operation of scissor lifts.

The M.E.W.P. – Boom Lift 3b training course is a one-day course that teaches operators how to safely and efficiently operate self-propelled telescopic booms, articulating booms, or mobile booms. The course covers a variety of topics, including:

• Introduction to MEWPs and the different types available
• Health and safety regulations and guidelines related to MEWPs
• Machine preparation, including pre-use inspection and maintenance checks
• Safe operating procedures, including emergency lowering
• Application of personal protective equipment (PPE)

The course also includes a practical assessment, where operators will demonstrate their ability to safely operate a boom lift.

Upon successful completion of the course, operators will be awarded an IPAF PAL Card, which is valid for five years. This card is proof that the operator has been trained to safely operate boom lifts, and it is required by many employers and job sites.

Here are some of the benefits of taking a M.E.W.P. – Boom Lift 3b training course:

• Improve your job prospects and earning potential
• Learn how to safely and efficiently operate boom lifts
• Reduce the risk of accidents and injuries
• Comply with health and safety regulations
• Gain peace of mind knowing that you are qualified to operate boom lifts

A Pivot Steer (P) training course is a comprehensive program that teaches operators how to safely and efficiently operate a pivot steer forklift truck. Pivot steer trucks are a specialized type of forklift that are highly maneuverable and can be used in tight spaces, making them ideal for use in warehouses and other industrial settings.

The course typically covers the following topics:

• Pre-use inspections
• Safe operating procedures
• Loading and unloading techniques
• Load stability
• Emergency procedures

In addition to classroom instruction, the course also includes practical training on a real-world pivot steer forklift truck. Upon successful completion of the course, operators will receive a certificate of qualification.

Here are some of the benefits of taking a Pivot Steer (P) training course:

• Learn how to operate a pivot steer forklift truck safely and efficiently
• Improve your job skills and make yourself more marketable to employers
• Reduce the risk of accidents and injuries
• Increase productivity and efficiency in the workplace
• Comply with workplace safety regulations

A Pallet or Pump Trucks Z training course is a course that teaches participants how to safely and efficiently operate pallet trucks and pump trucks. These machines are commonly used in warehouses and other industrial settings to lift and move pallets of goods.

The course will typically cover the following topics:

• Introduction to pallet trucks and pump trucks, including their different types and features
• Pre-use inspections
• Safe operating procedures
• Handling unladed and laden pallets
• Loading and unloading vehicles
• Truck stability and safety code
• Practical assessment

Upon successful completion of the course, participants will be issued a certificate of competence, demonstrating that they have the skills and knowledge necessary to operate pallet trucks and pump trucks safely.

Here are some of the benefits of taking a Pallet or Pump Trucks Z training course:

• Learn how to operate pallet trucks and pump trucks safely and efficiently
• Reduce the risk of accidents and injuries in the workplace
• Improve productivity and efficiency
• Increase job satisfaction and confidence
• Comply with health and safety regulations

A telehandler training course teaches participants the knowledge and skills needed to safely and competently operate a telehandler. Telehandlers are versatile machines that can be used for a variety of tasks, including lifting and transporting materials, placing loads at height, and performing construction and demolition work.

Telehandler training courses typically cover the following topics:

• Machine operation: Participants learn how to start, stop, move, and control a telehandler.
• Safe loading and unloading: Participants learn how to safely load and unload materials of different weights and shapes, and how to avoid overloading the telehandler.
• Maintenance and inspection: Participants learn how to perform routine maintenance and inspection tasks on a telehandler.
• Relevant legislation: Participants learn about the relevant legislation governing the safe operation of telehandlers.

Telehandler training courses are offered by a variety of training providers, including community colleges, trade schools, and private companies. Courses typically range in length from two to five days, and participants who successfully complete the course are awarded a certificate of completion.

Taking a telehandler training course is a great way to prepare for a career as a telehandler operator. Telehandler operators are in high demand in a variety of industries, including construction, agriculture, and manufacturing.

Lorry Mounted Crane (H.I.A.B) training courses teach you how to safely and efficiently operate a lorry-mounted crane. These courses cover a variety of topics, including:

• Health and safety regulations
• Crane operation and controls
• Load slinging and rigging
• Safe working loads
• Pre-use checks and maintenance

H.I.A.B training courses are typically 1-2 days long and include both theoretical and practical components. Upon successful completion of the course, you will receive a certificate of competence, which is required by many employers in the construction, transportation, and other industries.

Here are some of the benefits of taking a Lorry Mounted Crane (H.I.A.B) training course:

• Improve your job prospects
• Earn a higher salary
• Learn how to operate a crane safely and efficiently
• Reduce the risk of accidents and injuries
• Protect yourself and others in the workplace

A Banksman training course is an essential step for anyone who wants to work as a banksman, also known as a traffic marshal or signalman. Banksmen are responsible for the safe movement of vehicles and machinery on a variety of sites, including construction sites, warehouses, and ports.

The course will teach you the skills and knowledge you need to perform your job safely and effectively. You will learn about the different types of vehicles and machinery, the hazards associated with their movement, and the safety procedures that must be followed. You will also learn how to communicate effectively with drivers and operators using the standard hand signals.

Upon completion of the course, you will be able to:

• Understand the risks and control measures involved in the movement of vehicles and machinery
• Effectively communicate with drivers and operators using the standard hand signals
• Guide vehicles and machinery safely and efficiently
• Monitor the work area for hazards and take appropriate action
• Respond to emergencies in a calm and effective manner

Banksman training courses are offered by a variety of providers, including training companies, colleges, and universities. The courses typically last one to two days and include a combination of theoretical and practical training.